Litokol STARLIKE EVO 110 GRIGIO PERLA light gray epoxy resin adhesive joint 5 kg bucket

Litokol STARLIKE EVO 110 GRIGIO PERLA light gray epoxy resin adhesive joint 5 kg bucket

Quantity and size:
---------------------------------------
- 1 bucket = 5 kg
- Packaging unit = 1 bucket
- Weight: 5 kg
- 2-component epoxy resin mortar for laying and grouting mosaic, glass mosaic and tiles
- Color: 110 GRIGIO PERLA light grey

The product is characterized by:
----------------------------------------------
- very low water absorption
- high mechanical strength
- very good chemical resistance
- uniform colouring on tiles of all types with exclusive colors.

Suitable for laying and grouting (3 to 10 mm)
For ceramic and glass mosaic tiles in interior and exterior areas
-----------------------------------------------------------------------------------------
- Wall and floor coverings
- Wall and floor coverings in showers and bathrooms
- Heatable floors
- Balconies and terraces
- Kitchens

Properties:
---------------------
Acid-resistant two-component epoxy resin mortar.
Component A consists of epoxy resin, screed sand and additives.
Component B is composed of organic catalysts.

The most important properties of the product are:
----------------------------------------------------------------
- Very easy cleaning compared to normal cement grout fillers.
- Homogeneous coloration on all tile coverings. Exclusive color shades.
- High mechanical resistance.
- Non-absorbent
- No cracking after drying.
- Optimum chemical resistance.

Also recommended for:Grouting of swimming pools with thermal and salt water.
The two components are supplied premixed in their packaging.

Important:
-----------
12-24 hours after laying or grouting work, the epoxy resin haze must be removed with the Litonet product. Storage time: Please store in a frost-proof and dry place, note the expiry date before processing. Current processing instructions and current technical data sheets: - Click here -

Starlike® EVO - Creative opportunity
When planning a tiled surface, it is amazing how much a seemingly insignificant detail such as the joint can influence the final result, both in terms of technical conditions and appearance. This is particularly noticeable with mosaic tiling, where a completely different result can be achieved depending on the design of the joint. In order to guarantee the mechanical, physical and chemical resistance of the entire surface, the joint must form a single unit with the tiles. Litokol offers users and planners an exceptional solution with its Starlike® EVO product range.

Starlike® EVO is the only product in the world that can be used in 3 ways:
1. Epoxy filler for joints;
2.Tile adhesive class R-2T (improved reaction adhesive without vertical displacement);
3. Decor filler (via the addition of Decor).

Application data:

Waiting time before grouting:
Application on the floor:
- with normal setting tile adhesive: 24 hours
- with fast setting tile adhesive: 4 hours
- with mortar: 7-10 days

Application on the wall:
- with normal setting tile adhesive: 24 hours
- with fast setting tile adhesive: 4 hours
- with mortar: 2-3 days

Mixing ratio:
Component A: 93.7 parts by weight
Component B: 6.3 parts by weight
The two components are premixed in the respective packaging
Consistency of the mixture: Thixotropic paste
Specific weight of the mixture: 1.55 kg/l
Service life of the mixture: Approximately 1 hour at T = +23 °C
Permissible application temperatures: From +10 °C to +30 °C
Recommended application temperature: From +18 °C to +23 °C
Walkability: 24 hours at T = +23 °C
Ready for use: 5 days at T = +23 °C
Joint width: From 1 to 15 mm

Performance characteristics:
Initial shear strength (EN 12003): ? 2 N/mm2
Shear strength After immersion (EN 12003): ? 2 N/mm2
Shear strength After thermal shock (EN 12003): ? 2 N/mm2
Bonding open time (EN 1346): ? 0.5 N/mm2 after 20 minutes
Slip resistance (EN 1308): ? 0.5 mm
Resistance to abrasion (EN 12808-2): ? 250 mm3
Flexural strength after 28 days under standard conditions (EN 12808-3): ? 30 N/mm2
Compressive strength after 28 days under standard conditions (EN 12808-3): ? 45 N/mm2
Shrinkage (EN 12808-4): ? 1.5 mm
Water absorption after 4 hours (EN 12808-5): ? 0.1 g
Permissible temperature: From - 20°C to +100°C
Colors

CLASS COLD Collection:
100 Bianco Assoluto / 102 Bianco Ghiaccio / 105 Bianco Titanio / 110 Grigio Perla / 115 Grigio Seta / 120 Grigio Piombo / 125 Grigio Cemento / 130 Grigio Ardesia / 140 Nero Grafite / 145 Nero Carbonio

CLASS WARM Collection:
200 Avorio / 202 Naturale / 205 Travertino / 208 Sabbia / 210 Greige / 215 Tortora / 225 Tabacco / 230 Cacao / 232 Cuoio / 235 Caffè

GLAM Collection:
300 Azzurro Pastello / 310 Azzurro Polvere / 320 Azzurro Caraibi / 330 Blu Avio / 340 Blu Denim / 350 Blu Zaffiro / 400 Verde Salvia / 410 Verde Smeraldo / 420 Verde Prato / 430 Verde Pino / 500 Rosa Cipria / 530 Viola Ametista / 550 Rosso Oriente / 580 Rosso Mattone / 600 Giallo Vaniglia

METALLIC Collection:
Platinum / Shining Gold / Bronze / Rusty / Copper

Please observe the processing instructions and the technical data sheets for this product.
You can find these on our website or request them by e-mail before processing.